產品中心
Product Center
當前位置：首頁
產品中心涂層/線纜高度/激光測距測試儀英國易高Elcometer│材料檢測3230卷材濕膜輪易高Elcometer│3230卷材涂料濕膜測厚儀
產品簡介
英國易高Elcometer 3230卷材涂料濕膜輪與Elcometer 3230 濕膜輪相似，但測量卷材涂料濕膜厚度。由三個圓輪組成，外側的兩個圓輪外圈為滾齒形，在很滑的涂層上或基體快速移動時可測量的厚度。沿濕膜滾動濕膜輪，中心輪濕潤部分末端的讀數即為濕膜厚度。如果知道涂層的干、濕比率，便可通過濕膜厚度計算干膜厚度。
| 品牌 | ELCOMETER/英國易高 |
|---|
如有任何問題請與我司業務專員：
：豪
:fuhao@17Lp.com
How to use a Wet Film Wheel - Elcometer 3230 Wet Film Wheel
ISO 2808-7B, BS 3900-C5 method 7B, ASTM D4414-A specify that the wet film wheel should be perpendicular to the substrate and the thickness of the coating should be stated as that indicated on the central wheel - ensuring that the wheel has been rolled from maximum thickness to minimum thickness - thus avoiding surface tension.
Example
Hold the wheel by its central spindle. Begin at maximum thickness to reduce risk of inaccuracy caused by surface tension.
Roll the wheel through the wet film with the side 1 in the diagram touching the substrate. Roll for at least one whole turn and slowly enough for wetting to occur. Roll the wheel backwards by at least on complete turn. The wet film thickness is read from the scale, at the end of the wetted segment of the middle circle, 2 in the diagram
To use wheel on pipes, measure across the longitudinal axis （lengthways） of the pipe.
On rough surfaces, measurements will be made from the surface peaks and represent the minimum wet film thickness.
Elcometer 3230 卷材涂料濕膜輪
| 型號 | 分類 | 量程 | 分度 | 零件號 |
| Elcometer 3230/17 | Elcometer 3230 濕膜輪-卷材涂料 | 0~50μm | | K0003230M017 |
| Elcometer 3230/18 | Elcometer 3230 濕膜輪-卷材涂料 | 0~100μm | 5.0μm | K0003230M018 |
| Elcometer 3230/19 | Elcometer 3230 濕膜輪-卷材涂料 | 0~300μm | 15.0μm | K0003230M019 |
| Elcometer 3230/17a | Elcometer 3230 濕膜輪-卷材涂料 | 0~2mils | | K0US3230M017 |
| Elcometer 3230/18a | Elcometer 3230 濕膜輪-卷材涂料 | 0~4mils | | K0US3230M018 |
| Elcometer 3230/19a | Elcometer 3230 濕膜輪-卷材涂料 | 0~12mils | | K0US3230M019 |
| 附件 | 50cm（19″）濕膜輪手柄 | KT003230N002 | ||
| 100cm（39″）濕膜輪手柄 | KT003230N001 | |||
上一個：
返回列表
